VOLGA HVAC  Saudi Arabia

FRP Cooling Tower VOS-F

FRP Cooling Tower VOS-F

Item No.: #22
Brand: VOLGA HVAC®
Description
(FRP) Fiberglass cooling tower is a device designed to remove heat from water to air, this procedure is used for repeated cooling of water (circulating) in various industrial processes, condensers of chillers or air conditioners, etc.

FRP - VOLGA VOS-F COOLING TOWER: 

    Cooling Tower KSA

We design and manufacture all types of cooling towers: Cooling tower - open circuit. Cooling tower - closed circuit. Evaporative condenser. Dry coolers.

  

VOS- Series - FRP. Square Type 

Features

 High efficiency, save energy to the largest extent
 Fit with various environment changes in different indutries
 Matched equipment running normaly
 Completely comply with national standards
              


Components Instruction

CASING AND WATER BASIN

We Are Manufcuring As Saudi Arabian Factory As Approved By: VOLGA COOLING TOWER - VOS-F Series - Square Type Fiberglass reinforced polyester (FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.


FAN & DRIVING SYSTEM

In This Products All Our cooling tower VST Series fans with adjustable pitch blades are applied to being balanced, it operates stably and quietly. Material chosen are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for option.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.    


WATER DISTRIBUTION

We Using high coefficient rotating sprinkler head made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance.
 

FILLS

For The VOS-F Series We Using  a high quality & improved performance PVC Fills From 45 C To 90 C Temprutuer/ And Also We Provide Another Two Option For The Fills ( ABS) and PP, polypropylene with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.
 

FRAME

The VST Series Cooling Tower VOLGA- HVAC The framework Are  made From Two Metals Type As OPTION: 1-  hot dip galvanized steel (HDGS), 2- Stainless Steel
to makes the cooling tower in rust-free, durable and long service life.
 

Optional Accessories

 Noise reduction upgrade                        Anti-Freeze heater
 Vibration isolator & rubber mat              Stainless steel framework / bolts and nuts (304 / 316)
 High-temperature upgrade                    Dual-speed Motor & VFD motorAnti-Freeze heater

 

VOS-F Series Main Features are:

Skid mounted, compact & ready to install.

  • Fully/Or Partly automatic with controls of reputed brands. * OPOTION
  • Different options available for the cooling module.
  • Liberally sized fan and high-efficiency Fin & tube condensers.
  • GI-Steel 90 G/ Carboon Steel/ Stainless steel storage Coil Section and internals are available.
  • Digital temp. indicator for precise operation. * OPOTION
  • High pressure & volume pumps suitable for round the clock operation.
  • We Have More than 17 Years Experience In Saudi Arabia Market.

PROTECTION:

Reverse phase, Lack phase, Over current, Discharge air temp. * OPOTION

High/low temp/pressure protection Low-temp., water flow protection. 

* OPOTION

 

WARRANTY:

(1) 12 months from Date of initial startup or 24 months from Delivery date, whichever comes first

(2) Warranty for defective parts replacement only, not including fly to installation site and inspection.

(3) Certain amount of compensate for labor cost of repair available by negotiation. VOLGA COOLING TECHNOLOGIES

 

 All Parts Are:

 APPROVED: By: VOLGA COOLING TECHNOLOGIES

VOLGA HVAC ® 

 

 

Manufacture Standard

 Brand:  VOLGA HVAC ® 

 Parts Made: USA/ PRC/ KSA

 Manufacturing/ssembly: GLOBAL COOLING TOWER FACTORY. KSA.

VOLGA COOLING TECHNOLOGIES  USA.

APPROVED:

(CTI), (ISO 9001:2015), (ISO 45001:2018), (ASO: QCMS: 1/2020), (ASO: CSAMS: 1/2021), (ASO: OHSMS: 1/2021) Certificates.

 

 

GLOBAL COOLING TOWER FACTORY With Brand VOLGA HVAC ® VOLGA COOLING TECHNOLOGIES INDUSTRIAL/ COMMERCIAL Cooling Tower Or any Water Cooled System Are designed for cooling of process types of equipment, parts, For Saudi Arabia & GCC. Countries  With Ambient air temp From 52 °C To 62 °C and media in various industries like plastic molding, PET blowing, CNC machines, water treatment, Packaging machinery Metals Manufacturing, Foods Factories etc…

 

Environmentally friendly products

VOLGA HVAC ® 

 OUR HVAC PRODUCTS Are 

Go Green Hvac


     

You Can Contact us for more information